Technical measures for driving safety of motor veh

  • Detail

Technical measures for driving safety of motor vehicles in the plant

1. Motor vehicles in the plant shall be driven by drivers who have obtained driving licenses, and non drivers are not allowed to drive The driver shall understand the structure, technical performance, traffic rules and operating procedures of the test curve after the safety test, and must carefully maintain the motor vehicle according to the cross operation method of cleaning, firmness, lubrication, adjustment and corrosion prevention

2. The hydraulic system of the vehicle shall have smooth pipeline, good sealing, no deformation and jamming of the operating rod, good coordination of the distributor elements, sensitive and reliable action of the safety valve, and no crawling, stagnation and obvious impulse of the working parts within the rated speed range

3. Various instruments of the vehicle shall be complete and sensitive, with continuous efforts to improve service standards

4. The technical condition of the cab shall ensure that the driver has normal working conditions

5. The fuel tank and fuel pipeline shall be firm and equipped with protective devices to prevent damage and oil leakage due to vibration and impact. The position of the exhaust pipe under the fuel pipe shall be more than 300mm apart, and various adhesive resins, sealing modified resins or effective heat insulation devices shall be set. The fuel tank shall be more than 200mm away from the exposed electrical connector and electrical switch

6. All kinds of motor vehicles in the plant shall also meet their own unique safety conditions and requirements

7. Operating rules that must be implemented by motor vehicle drivers in the plant:

7.1 ten slows are slow start, slow turn, slow descent, slow reverse, slow bridge crossing, slow intersection, slow poor vision, slow rain and snow, and slow trailer coupling

7.2 the ten prohibitions are: no overloading, no gear grabbing, no high-speed driving, no drunk driving, no eating while driving, no talking with others, no mixed loading of people and goods, no reversing, no driving by non drivers, and no climbing up and jumping down during driving

7.3 ten no open means: do not drive when the vehicle is sick, do not drive when the door is not closed, do not drive when the person is not seated firmly, do not drive when the goods are not properly loaded, do not drive when the person standing on the toe board, do not drive when the tipping bucket is not properly loaded, do not drive when the cargo is too high and long without safety measures, do not drive when the dangerous goods are loaded in violation of safety standards, do not drive when the three licenses are incomplete, and do not drive when the students are not led by a coach

7.4 seven good points are: good braking, good lighting, good horn, good signal signs, good vehicle maintenance, good compliance with rules and regulations, and good implementation of safety measures

Copyright © 2011 JIN SHI